Fuel Substitution: Power Plants Currently Switching to Natural Gas 6 comments
-
Font Size:
-
Print
- TweetThis
A number of readers have questioned the thesis of the earlier post that suggests that natural gas oversupply creates an overhang in distillates, thus pressuring crack spreads and ultimately capping oil prices. In particular some question the ability to switch between the two fuels.
Fuel switching is actually quite common at power plants, the biggest users of natural gas. Most modern generators can switch between gas and fuel oil, and many can switch to coal as well. In fact cheap natural gas has created an oversupply of coal as well. 
source: EIA
Similarly distillates (fuel oil) inventories are building up, pressuring crack spreads:
source: EIA
Power plants and others are storing the more expensive fuel to be used in the event natural gas prices spike (because natural gas is difficult to store and not much storage is available). But for as long as gas prices remain depressed, buying gas in the spot market makes a great deal of sense for power producers, reducing the demand for other fuels.
During some periods in the past, natural gas was more expensive to burn, with coal and distillates being the preferred fuel. Natural gas at some plants was used to provide power during peak demand because gas generation could be brought online very quickly. But with the push toward a more environmentally friendly power generation, the switching capacity has increased significantly. The paper below provides an overview of both the switching capability and its use in practice. Since the paper was published, fuel switching technology has improved even more, allowing plants to respond to market prices and switch relatively quickly.
Related Articles
|
-
The Seeking Alpha 100
See allThe top 100 stock
market authors
selected for publication
Seeking Alpha 100 » -
Fastest Climbers
Authors with the largestSee all
increase in followers
in the last 7 days
Fastest Climbers » -
Top Commenters
Top commenters,See all
as ranked by their peers
Top Commenters » -
Top Instabloggers
The 100 most active
Instabloggers.-
1
David Fry
-
2
TraderMark
-
3
Don Dion
-
4
Cliff Wachtel
-
5
Mike Havrilla
Top Instabloggers » -
1
-
Top StockTalkers
TopSee all
StockTalkers.
Top StockTalkers »
This article has 6 comments:
give some examples of utilities that have a alternate power plant source of boiler heat.
A generating unit capable of burning more than one fossil fuel is referred to as a dual-fired unit. Some dual-fired units can only burn one fuel at a time (that is, the fuels are fired sequentially), while others can burn more than one fuel simultaneously (concurrent firing of different fuels). A sequentially fired unit generally uses one fossil fuel as its primary energy source, but can switch to a second fossil fuel as an alternate energy source.
Generally true, gas-fired boilers can use fuel oil, but that's OTM right now. But what is happening is marginal coal units are being displaced by combined cycles (not NG-fired boilers) with their superior heat rates.
BUT, the recent run-up in prompt gas has put some CC's OTM as well, along with negative sparks in the winter on the CC's; not good. That means something has to change, probably a narrowing of the front-end contango.
Why on earth would anyone burn oil?
finance.yahoo.com/news...