Seeking Alpha

The Gold Report's  Instablog

The Gold Report
  • on Gold & Precious Metals
Send Message
The Gold Report features leading investment coverage of gold, silver, other precious metals, base metals and gems. A Streetwise Reports publication. www.TheAuReport.com
My company:
The Gold Report
My blog:
TheAuReport.com
My book:
The Gold Report Newsletter
  • Grade Is King: Andrew Richmond 0 comments
    Jul 13, 2012 3:06 PM
    Grade Is King: Andrew Richmond

    Source: Brian Sylvester of The Gold Report (7/11/12)

    http://www.theaureport.com/pub/na/13853

    It's time for investors to brush up on their knowledge of NI-43-101-compliant resources and deposit grades with one of the world's foremost experts. Andrew Richmond, a principal at geological consulting firm Martlet Consultants in Brisbane, Australia, discusses the importance of grade, selectivity and size in establishing the economic value of deposits in this exclusive interview with The Gold Report.

    The Gold Report: Andrew, you do a lot of work vetting deposits. You have worked on epithermal gold, copper-gold porphyries, iron and coal deposits-just to name a few. We're here today to help retail investors gain a better understanding of NI-43-101-compliant resources and deposit grades. Let's start with resource classifications.

    Andrew Richmond: The Canadian Institute of Mining, Metallurgy and Petroleum (NYSE:CIM) defines an "Inferred mineral resource" as that part of a mineral resource for which quantity and grade or quality can be estimated on the basis of geological evidence, limited sampling and reasonably assumed, but not verified, geological and grade continuity. The estimate is based on limited information and sampling gathered through techniques from locations such as outcrops, trenches, pits, workings and drill holes.

    An "Indicated mineral resource" is that part of a mineral resource for which quantity, grade or quality, densities, shape and physical characteristics can be estimated with a level of confidence sufficient to allow the appropriate application of technical and economic parameters to support mine planning and evaluation of the economic viability. The estimate is based on detailed and reliable exploration and testing information gathered through appropriate techniques from locations that are spaced closely enough for geological and grade continuity to be reasonably assumed.

    A "Measured mineral resource" is that part of a mineral resource for which quantity, grade or quality, densities, shape, and physical characteristics are so well established that they can be estimated with confidence sufficient to allow the appropriate application of technical and economic parameters to support production planning and evaluation of the economic viability of the deposit. The estimate is based on detailed and reliable exploration, sampling and testing information gathered through appropriate techniques from locations that are spaced closely enough to confirm both geological and grade continuity.

    TGR: What's the difference between a mineral reserve, a Probable mineral reserve and a Proven mineral reserve?

    AR: The CIM defines a mineral reserve as the economically mineable part of a Measured or Indicated mineral resource demonstrated by at least a preliminary feasibility study (NYSE:PFS). This study must include adequate information on mining, processing, metallurgical, economic and other relevant factors that demonstrate that economic extraction can be justified. A mineral reserve includes diluting materials and allowances for losses that may occur when the material is mined.

    A Probable mineral reserve is the economically mineable part of an Indicated and, in some circumstances, a Measured mineral resource demonstrated by at least a PFS. This study must include adequate information on relevant factors that demonstrate that economic extraction can be justified.

    A Proven mineral reserve is the economically mineable part of a Measured mineral resource demonstrated by at least a PFS. This study must include adequate information on factors that demonstrate that economic extraction is justified.

    TGR: Who qualifies as a qualified person (QP)?

    AR: A qualified person is an engineer or geoscientist with at least five years of experience in mineral exploration, mine development or operation or mineral project assessment, or any combination of these, who has experience relevant to the subject matter of the mineral project and the technical report; and is a member or licensee in good standing of a professional association.

    TGR: What's the difference between a PFS and a feasibility study?

    AR: If you were to do a survey of mining experts, you'd come up with responses indicating that a prefeasibility study could have a margin of error anywhere between plus-or-minus 15-25%. A feasibility study, which used to be known as a bankable feasibility study, could be within plus-or-minus 5-15%. The feasibility study is more detailed. It's the final study that's done before the directors of a company will give the go-ahead for a project to proceed.

    TGR: Is a PFS the same as a preliminary economic assessment (PEA)?

    AR: No. A PEA can pre- or postdate a PFS. A PEA can make assumptions about some of the criteria and parameters that go into the study. At that point, some of the studies may not have been done. For example, one of the things that is often done late for an open-pit deposit is special geotechnical drilling where the pit walls are going to be to determine what the slope angles may be. But until you've done a feasibility study, a company can't work out where the pit walls are going to be and do that type of drilling. Whereas if you get to the PFS and the final feasibility study, the technical studies that are required for sign-off on a mining project are all done.

    TGR: What are some common mistakes technical personnel make when preparing reports?

    AR: If I'm looking at an acquisition, merger or even just a joint-venturing project for a client, I work under the following three principles. First, I assume nothing. Second, I check everything. Third, and it may not sound very good, but I trust no one. I follow up on everything and a number of times people try and pull the wool over my eyes. It happens regularly.

    These studies are often rushed to make corporate deadlines. But they may have underestimated the amount of time it takes and these studies are almost invariably late. A study arriving to market late could be good or bad. It may mean that the economics are not stacking up, so they're looking at different ways of mining it. There may be some metallurgical issues that need fine-tuning.

    Companies often use optimistic commodity prices and capital expenditure (capex) costs. If these are in the lower-quartile cost curve for the region, type of project and commodity, I look for a good justification for those assumptions. Sometimes there is no risk analysis, or it's extremely limited.

    My area of expertise is resource estimation, so I look for whether the resource-modeling techniques consider the geology adequately and whether they also suit the proposed mining methods. A very simple test is to use the average grade of the samples that have been used to estimate the block model. Are they the same or within 5-10%? The average grade of the samples in the drill holes must be the same as the average grade of the block model.

    In precious metal deposits, I look for companies not cutting the extreme grade values. If the average grade of a deposit is, say, 2 grams per ton (g/t), there may be one or two samples that are over 100 g/t. Those samples need to be treated very carefully. Otherwise, they have the potential to increase the average grade of the block model quite substantially.

    TGR: What are the differences between rapid air blast (RAB) drilling, reverse circulation (RC) drilling and diamond drilling?

    AR: RAB and the RC drilling are percussive-type drilling techniques, which means that they break the rock sample up. RAB drilling is a technique that tends to be used mostly for scout drilling to test near-surface material. There can be the potential for contamination because the sample comes up between the rod and the edge of the drill hole.

    With RC drilling, the sample comes up an annulus in the outside of the drill hole, so there's far less potential for contamination. RC drilling can also go down to roughly 1,000 meters (m).

    Diamond drilling is the only one that returns core samples. In general, diamond drilling is better. There are a few instances where the mineralization may be preferentially washed out during diamond drilling, because it uses water to keep the drill bits cool at the base.

    RC drilling is a lot cheaper and quicker, but diamond drilling tends to provide better samples.

    TGR: Grade is very important in the overall scope of a deposit. But is it the most important thing when you're looking at drill results?

    AR: Grade is king in a deposit. But, in reality, it's the relationship between grade, tons, geometry and depth of the mineralization that indicate if it could potentially be extracted economically. It may well have a high-grade intercept, but it may be so narrow that it's not going to make a deposit, or there may be insufficient tons to justify the capital of a plant and other infrastructure.

    TGR: When it comes to gold deposits, what are some mineralized systems you favor?

    AR: There are several different types of mineralized systems for gold. The higher-grade ones often tend to be epithermal deposits, known normally as high- or low-sulfur epithermal deposits. Both types can be extremely high grade, but they tend to be narrow zones that can be mined favorably underground. Porphyry systems can have significant amounts of gold, in some instances more gold than copper. They can have billions of tons and still be economic even if it's only 0.5 g/t.

    TGR: Just because of the economies of scale?

    AR: Yes, definitely because of the economies of scale, but also because they probably have low stripping ratios, which means that there's very little waste for the amount of ore.

    TGR: Do you have a preference for how deep epithermal deposits are?

    AR: As close to surface as possible, but there are gold deposits in excess of 4 kilometers (km) deep being mined in Witwatersrand, South Africa.

    TGR: In northern Ontario, too. Maybe not 4km, but thereabouts.

    AR: The deeper you go, the higher grade the deposit has to be. It's a tradeoff.

    TGR: What would you consider a high-grade epithermal gold deposit?

    AR: Normally, 30 g/t or more if it's small tonnage. If it's bigger than 100 million tons (Mt), even 2 g/t could be considered good with the current gold price. Anything above 5 g/t for this size would be considered an excellent deposit. There are very few of those around the world.

    TGR: What's high grade at a copper-gold porphyry deposit?

    AR: As they tend to be several 100 Mt or more than a billion tons, anything where the combined copper and gold is above 2%. Copper and gold are both significant economic contributors in those types of deposits.

    TGR: Let's get to those byproduct credits. How important can those be to the economics of a deposit?

    AR: They can be extremely important. First, there's the economic benefit. However, there are also other elements in the core that need to be assayed because they may have environmental impacts that require a costly remediation, such as pyrite, or have penalties associated with them during concentrate sales.

    TGR: Is that something you like to see in technical reports or feasibility studies?

    AR: Definitely. If there's a lot of pyrite in the drill core, a company has to manage the disposal of that in some way. If there were nothing in the feasibility study about that, it would be a red flag that the company hasn't done the work appropriately.

    TGR: Let's look at an example of a recent drill result published by Almaden Minerals Ltd. (AMM:TSX; AAU:NYSE). On June 25, Almaden said it hit 25m of 4.22 g/t gold and 15.41 g/t silver. In other words, 4.5 g/t gold equivalent (Au eq) at its 100%-owned Tuligtic project on the main Ixtaca Zone in Mexico. "Results from these holes continue to show that this zone, as presently interpreted, exists over a strike length of nearly 700 meters," it said. What can you tell us about that deposit based on that statement?

    AR: There are quite a few things you can tell about that-and I assume that's probably only a small part of it. We know 4.22 g/t is probably the highest grade for the latest drill results. We can also see from the way it has characterized the gold equivalency that gold is the main economic contributor. Silver will contribute slightly. I normally work in ratios of about 50:1, or 1 g/t gold equals about 50 g/t silver as a rough rule of thumb.

    The company seems to think it's a good project. It has four drill rigs on the exploration program, so it upped the number of drill rigs. We can also see that the potential strike length is 700m, but we don't quite know what the true thickness is. The true thickness is probably not 25m. We could work with the figure of 15m to give us two dimensions of the geometry of the deposit. We're still missing the third one, depth. But the dimensions are starting to indicate that it is possible that the project could become economic.

    The combined length and grade of the other drill holes is obviously going to be lower than the 4.22 g/t. I'd guess that it's probably going to be an average grade in 1-2 g/t, which means it will be an open-pit project.

    TGR: What percentage of projects reach their life-of-mine potential outlined in the feasibility study?

    AR: They should all reach the life-of-mines potential, but that's theory. In practice, because these studies are based on assumed commodity prices and that tends to be the biggest risk, the commodity price with the lowest potential downside would be the one that most often reaches its planned potential. Normally, that's the bulk commodities.

    Probably 60 to 80 iron ore projects out of 100 may do well. Some actually go well beyond the original life potential, because commodity prices tend to go up over time and the cutoff grade can drop, so the deposit is reassessed every five years. One of the problems with looking at it that way is that those projects may be the ones with the lowest potential downside, but they also can miss out on the potential for the greatest upside price movement.

    TGR: Should investors ever buy a stock based on a drill result?

    AR: Definitely, but especially if they have a high-risk tolerance. If they want to get the big payoff, buy after even just one drill result. A series of drill results would be safer, but they've probably lost some of the potential upside. Maybe 1 in 20 exploration companies will eventually pay off. But the payoff for getting in early at the initial drill hit could be 50- to 100-fold. There's a reasonable chance of getting a good return on average.

    TGR: You're talking about an intercept in excess of maybe 100m and maybe a few grams of gold.

    AR: If I saw 100m at 2 g/t on the first drill hole into a project, I'd be buying.

    TGR: You're a specialist in the South Pacific area and have worked on some deposits there. Which deposits do you find particularly interesting?

    AR: The South Pacific is an area a lot of investors may not be familiar with. It's got some specific issues related to landowners. It does tend to be high risk, high reward. It's also got high exploration costs. For example, a lot of projects in Papua New Guinea are done all by helicopter. On some of the other islands, there's political risk related to being able to keep the equity in the projects.

    One interesting project is Nautilus Minerals Inc.'s (NUS:TSX) high-grade copper and gold project, Solawara 1, which is at a depth of 1,500m in the Bismarck Sea. The average copper and gold grades are about 7%. It has some technical challenges and it recently got into a dispute with the Papua New Guinea government about its equity participation.

    TGR: Do you really believe that deposits on the bottom of the ocean can be economically mined?

    AR: I think so. Oil companies have led the way on deep-ocean and deep-sea drilling and production.

    TGR: But it's much easier to pump out a liquid or a gas versus a slurry of various fragments and bits of ore.

    AR: I've been involved in the Nautilus project since 2008. I've watched the way the company has come on, the number of people it has, the research and development it has put in. It has progressed the exploration front from putting drill rods down 1,500m from a surface ship to attaching a drill rig to a remote operated vehicle to drill 30m holes, store all the core, and then come up to surface and see it come out. The chances for it to succeed are extremely high.

    TGR: In open-pit and underground deposits, there's a heavy use of explosives to collect the ore. Then companies use the load-haul-dump machines to scoop it up and take it for processing. How will Nautilus do that on the ocean floor?

    AR: I don't know whether you've seen a "road header," or a similar device that sits on the bottom and grinds the rock materials the same way that a road or train tunnel is dug. It will use these road headers to grind up the material and then use a riser system of air and water to lift the material up to a ship. Nautilus isn't going to be mining huge tons. These are very high grade.

    There are two positives about the project. If it doesn't work out, the ship is a really large dredge that can be set for another project. Nautilus is also moving toward the manganese nodules, which have copper, nickel and cobalt, down more than 4km.

    TGR: If they can pull that one off, it opens up a completely different door for a number of companies. I'm sure that the majors would be looking at that quite curiously. At least a couple of majors are already invested in Nautilus.

    AR: Yes. Metalloinvest Holding, Anglo Minerals Ltd. (AGOGF:OTCPK) and Mawarid Mining are its major shareholders. It's well funded. It just has that dispute with the Papua New Guinea government, which has caused the share price to drop a bit.

    TGR: Do you think that will get resolved rather quickly?

    AR: I think it will be resolved. The government there is favorable to mining. I think it just comes down to money.

    TGR: Are you working on any other projects in that region?

    AR: I'm working on a project in Fiji owned by Lion One Metals Ltd. (LIO:TSX.V; LOMLF:OTCQX; LY1:FSE). It's quite fortunate because it has access to infrastructure and a trained workforce. Its Tuvatu project is located about 20 minutes from an international airport. It has good infrastructure, such as ports and roads. It has a trained workforce, because the other big gold mine in the region, Vatukoula Gold Mines Plc (VGM:LSE; VATKF:OTCPK), has downsized its staff. Lion One has also had extensive negotiations already with the local landowners, who can often hold up projects. A lot of them are hired to work on the project.

    A lot of the people in the Pacific Islands don't understand mining. They may hear bad things about it. Gold Anomaly Ltd. (GOA:ASX) in Papua New Guinea flew some of the local chiefs to another mine nearby so they could get an understanding of what mining actually is.

    TGR: Do you think that Lion One will be allowed there?

    AR: My personal opinion is that it will. There have been some political issues over the last 10-20 years with a number of governments being overthrown. The one thing that's been consistent through all that is the security of mining tenure. The governments haven't interfered with those. The Vatukoula mine has operated consistently through all that. It's even changed ownership two or three times.

    TGR: What can you tell us about Tuvatu?

    AR: Tuvatu is a high-grade underground project. It's an epithermal gold deposit, which tends to be a narrow vein. There was an exploration drive by Emperor Gold Mines Ltd.in the 1990s, but the company decided not to persevere due to the gold price prevailing at that time. A positive about this deposit is that the gold is visible on the drill core. I've worked on over 100 gold deposits during my career and there's probably only three or four where I've seen visible gold. It also has 600 drill holes going through deposits. I'm really confident that there's mineralization there.

    TGR: Are those all NI-43-101-compliant drill results?

    AR: Not all of them are. NI 43-101 compliance means that a qualified person (QP) will have signed off on them. Now there has been an NI 43-101 document issued by Lion One that has been signed off on by a QP, accepting those drill holes, even though they were mostly drilled in the 1990s. The company is also undertaking its own drilling program. There are about 40-50 drill holes, which are going to support the old drilling.

    The company is also implementing a very good quality assurance and control program to ensure that the samples are high quality and the assay results are robust. That supports the historical drilling if the results are the same order of magnitude on average.

    TGR: There's no resource as of yet, though?

    AR: They do have a resource that was announced in late 2010. I've been hired to provide an updated resource estimate that will include its current drilling program, and to make sure all the processes put in place satisfy NI 43-101 rules and regulations on an ongoing basis. The work is still in progress, but hopefully it will be published sometime this year.

    TGR: Parting thoughts?

    AR: Investors need to be skeptical of stock exchange announcements and read between the lines. Every exploration company is trying to get funding, but not all of their projects are going to go ahead. Investors need to pay close attention to stock exchange announcements and pick companies carefully.

    TGR: Thanks for sharing your depth of knowledge with us today.

    Dr. Andrew Richmond is a geostatistician with 25 years of experience in resource evaluation, mining and geostatistical research. He provides consulting services in the application of both routine and specialized geostatistical techniques in the field of mineral resource evaluation, mining geology and grade control. Dr. Richmond has been involved in a wide variety of geostatistical studies on gold, silver, copper, lead-zinc, nickel (laterite and sulphide), tungsten, molybdenum, coal and uranium deposits and has provided geostatistical support to several operating gold mines. Dr. Richmond has presented several geostatistical short courses in Australia, South America and Europe.

    Want to read more exclusive Gold Report interviews like this? Sign up for our free e-newsletter, and you'll learn when new articles have been published. To see a list of recent interviews with industry analysts and commentators, visit our Exclusive Interviews page.

    DISCLOSURE:
    1) Brian Sylvester of The Gold Report conducted this interview. He personally and/or his family own shares of the following companies mentioned in this interview: None.
    2) The following companies mentioned in the interview are sponsors of The Gold Report: Lion One Metals Ltd. Streetwise Reports does not accept stock in exchange for services. Interviews are edited for clarity.
    3) Andrew Richmond: I personally and/or my family own shares of the following companies mentioned in this interview: None. I personally and/or my family am paid by the following companies mentioned in this interview: Lion One Metals Ltd., Gold Anomaly Ltd. and Nautilus Minerals Inc. I was not paid by Streetwise Reports for participating in this interview.

    Streetwise - The Gold Report is Copyright © 2012 by Streetwise Reports LLC. All rights are reserved. Streetwise Reports LLC hereby grants an unrestricted license to use or disseminate this copyrighted material (i) only in whole (and always including this disclaimer), but (ii) never in part.

    The Gold Report does not render general or specific investment advice and does not endorse or recommend the business, products, services or securities of any industry or company mentioned in this report.

    From time to time, Streetwise Reports LLC and its directors, officers, employees or members of their families, as well as persons interviewed for articles on the site, may have a long or short position in securities mentioned and may make purchases and/or sales of those securities in the open market or otherwise.

    Streetwise Reports LLC does not guarantee the accuracy or thoroughness of the information reported.

    Streetwise Reports LLC receives a fee from companies that are listed on the home page in the In This Issue section. Their sponsor pages may be considered advertising for the purposes of 18 U.S.C. 1734.

    Participating companies provide the logos used in The Gold Report. These logos are trademarks and are the property of the individual companies.

    101 Second St., Suite 110
    Petaluma, CA 94952

    Tel.: (707) 981-8999
    Fax: (707) 981-8998
    Email: jluther@streetwisereports.com

Back To The Gold Report's Instablog HomePage »

Instablogs are blogs which are instantly set up and networked within the Seeking Alpha community. Instablog posts are not selected, edited or screened by Seeking Alpha editors, in contrast to contributors' articles.

Comments (0)
Track new comments
Be the first to comment
Full index of posts »
Latest Followers

StockTalks

  • " $NMREF's Lofdal has relatively low preproduction capital requirements"-Ryan Castilloux. Read More: http://ow.ly/Mf80Z
    5 days ago
  • " $BALMF intersected a zone of mineralization averaging 4.28 g/t over 54.78m"-Wayne Hewgill. Read More: http://ow.ly/Mf8dP
    5 days ago
  • " TREVF discovered massive sulphides down-plunge of the Caribou resource"-Wayne Hewgill. Read More: http://ow.ly/LVGbo
    Apr 21, 2015
More »
Posts by Themes
Instablogs are Seeking Alpha's free blogging platform customized for finance, with instant set up and exposure to millions of readers interested in the financial markets. Publish your own instablog in minutes.