Semtech Featured in Live Demonstration of the Interoperability of 100G Channels at the Optical Internetworking Forum at ECOC 2012
CAMARILLO, Calif.--(BUSINESS WIRE)-- Semtech Corporation (SMTC), a leading supplier of analog and mixed-signal semiconductors, today announced it will be participating in the Optical Internetworking Forum (OIF) demonstration of the CEI-28G-VSR Implementation Agreement (IA) at ECOC 2012 in Amsterdam.
One of the OIF demonstrations will feature Semtech and TE Connectivity Ltd.(TE) showcasing an active copper cable (ACC) application leveraging the QSFP-28Gb/s form factor operating at 25.78 Gb/s. This demonstration will include the TE 28-Gb/s QSFP-ACC assembly, which features Semtech GN2425/26 25-28-Gbps clock and data recovery (CDR) chips.
The TE 28-Gb/s QSFP-based ACC assembly supports OIF CEI-28-VSR applications as well as next-generation 100-Gb/s Ethernet and 100-Gb/s InfiniBand Enhanced Data Rate (EDR) applications. It transmits between 25 Gb/s -28 Gb/s data rates over 2 meters of four-channel (eight pairs), 34gauge copper cable. This reduced wire gauge results in a cable assembly with a 5.8mm overall diameter enabling increased airflow and improved cable management.
TE is pleased to participate with Semtech in this important demonstration that showcases real-world solutions for cable management issues, said Nathan Tracy, Communications Industry Manager at TE and OIF Technical Committee Vice Chairman. This demonstration is a great example of a solution that meets the communications and networking industries need for a small, 100-Gbps connection.
Semtechs GN2425/26 CDRs extend the reach and robustness of 25 Gb/s copper links by compensating for losses in the transmission medium and by resetting the jitter budgets. This reach is accomplished though industry leading sensitivity and jitter performance, which also enables reduced module power as the amount of required electrical equalization is reduced. The host side of Semtechs CDRs features industry leading performance, which exceeds the CEI-28G-VSR IA requirements.
By utilizing low-jitter CDRs, Semtech is enabling copper cable assemblies to extend the reach of thin-gauge ACC solutions. This is an important step as short reach ACCs play a critical role in the roll out of 100-Gb/s systems and next-generation consumer interconnectivity applications.
Active cables offer optimal reach and power while simplifying the design of the high-speed serial link between the host ASIC and the cable connector, said Imran Sherazi, Vice President, Marketing and Applications, in Semtechs Gennum Product Group. Teaming up with TE to demonstrate these advantages helps to increase industry awareness and adoption of Active Cables as a solution for system designers.
A public demonstration of the event will be on display September 17-19, 2012 at ECOC in Amsterdam, OIF Booth #269. Additional information can be found at: http://www.oiforum.com/public/OIF_Interoperability_ECOC_2012.html
Several companies, including Semtech, will unite under the banner of the Optical Internetworking Forum to showcase multi-vendor participation in OIF interoperability. The OIFs physical layer and link layer demonstrations will feature host ASICs with VSR SERDES, host PCB traces, optical module connectors, module retimers, active copper cable assemblies, optical transceivers, host ASICs with LR SERDES, backplane PCBs and backplane connectors.
Semtech Corporation is a leading supplier of analog and mixed-signal semiconductors for high-end consumer, computing, communications and industrial equipment. Products are designed to benefit the engineering community as well as the global community. The company is dedicated to reducing the impact it, and its products, have on the environment. Internal green programs seek to reduce waste through material and manufacturing control, use of green technology and designing for resource reduction. Publicly traded since 1967, Semtech is listed on the NASDAQ Global Select Market under the symbol SMTC. For more information, visit http://www.semtech.com.
About TE Connectivity
TE Connectivity is a global, $14 billion company that designs and manufactures approximately 500,000 products that connect and protect the flow of power and data inside the products that touch every aspect of our lives. Our nearly 100,000 employees partner with customers in virtually every industry from consumer electronics, energy and healthcare, to automotive, aerospace and communication networks enabling smarter, faster, better technologies to connect products to possibilities. More information on TE Connectivity can be found at http://www.te.com.
Semtech, the Semtech logo, and Gennum are registered marks of Semtech Corporation. OIF is a registered mark of Optical Internetworking Forum. TE is a registered mark of TE Connectivity.
Pauline Cadena, 805-389-2755
Source: Semtech CorporationCopyright Business Wire 2012