Adjusting M1:M2 VIX Futures Contango For Days To Expiration

|
About: iPath S&P 500 VIX Short-Term Futures ETN (VXX), Includes: SVXY, UVXY, VIXY
by: Brent Osachoff
Summary

M1:M2 VIX futures contango levels are a popular metric volatility traders pay attention to.

However the raw value alone may be misleading.

For the most accurate reading, we need to make an adjustment and account for the number of days to expiration.

For all us volatility traders, checking the VIX futures term structure is something we all do several times a day. A solid source for the information is vixcentral.com, and one of the many useful metrics we're looking for there is the level of M1:M2 VIX futures contango/backwardation. (I wrote a full article explaining this mechanism here if you need a refresher)

However, the raw contango/backwardation value alone may be misleading, especially around expiration as I will show in this article. Here's an example to build off:

VIX futures term structure: From Monday April 15th, 2019

M1:M2 VIX futures contango on Apr 16, 2019

- The 1st month VIX future M1 is at 12.76

- The 2nd month VIX future M2 is at 14.65

To calculate the current level of contango is a simple calculation:

(M2 - M1) / M1

(14.65 - 12.76) / 12.76 = 14.81% contango

Why is this potentially misleading?

The problem with this calculation though is there's only 1 day left until the front month VIX future expires. If you hover over any of the futures on vixcentral.com you can see additional information. Notice below how the front month future expires in 1 day?

M1:M2 VIX futures showing 1 day to expiration

Basic explanation of how volatility ETPs like VXX work

Volatility ETPs are unique in that they don't derive their price based on supply and demand of the actual ETP. Instead, they hold a combination of the M1 and M2 VIX futures contracts, and based on the values of those contracts and how they move in relation to the spot VIX (convergence to spot VIX at expiration) they derive their price.

(I have a full video explanation of VIX futures expiration here)

  • At the start of a new expiration cycle, VXX would be using 100% of the new M1 contract and 0% of the new M2 contract. As time goes by, that weighting shifts away from M1 and towards M2, a little bit each day.
  • So half way through the expiration cycle for example, VXX would be using 50% of the front month M1 and 50% of the back month M2 in its calculation.
  • Right before expiration, the calculation is using 100% of the back month M2 contract and 0% of the front month M1 contract that is going off the board soon.
  • Then finally expiration happens and the calculation is once again using 100% of the front month M1, and 0% of the back month M2. This cycle repeats every single month.

But notice, the M2 that was being used 100% on expiration day is the same contract that's now being used 100% as the new M1. The only thing that's changed is its position in the line, not its value.

* So now relevant to the adjustment mechanism, when M1 expires and moves off the term structure completely, the current M2 becomes the new M1. The current M3 becomes the new M2. The current M4 becomes to new M3. This continues right down the line of VIX futures all the way with the current M8 becoming the new M7. That front month leaves the board on expiration day and the new futures continue until the next monthly expiration.

The "new" M1:M2 contango level

So when that very low priced M1 future contract expires and leaves the board, the new M1:M2 contango relationship is going to be substantially lower on Wednesday right?

  • The current M2 that's soon to be M1 is at 14.65
  • The current M3 that's soon to be M2 is at 15.47

If we do the same basic contango calculation we did before:

(15.47 - 14.65) / 14.65 = 5.6% contango

That is quite the difference. From nearly 15% contango on Monday, to perhaps as high as 17% contango on Tuesday, and then maybe just around 5.6% contango on Wednesday. Nothing material would have changed in the markets over this period, yet contango will be far lower.

And as far as percentile ranking of all previous values, you can see how much of a difference that makes.

M1:M2 VIX futures from Monday to Wednesday

If just using the M1:M2 VIX futures value as is without the adjustment, one might think contango is nearly as high as it ever gets, at the 97th percentile. However the true value, which will reveal itself on the Wednesday after expiration is fairly middle of the road at just the 55th percentile.

Obviously this could have a dramatic effect on any systematic volatility strategies that are implementing M1:M2 VIX futures as one of the input variables. It may not matter as much if going from 15% to 5%, but what about going from 5% to something closer to 0%, or even negative and into backwardation when the front month expires? I can definitely imagine a scenario where that affects the signals.

So we need to adjust the M1 & M2 VIX futures values to also take into account the number of days to expiration.

A potential adjustment method:

There's no right way to do it so if you have a method of your own, I'm sure it does the job just fine. I have my own way of calculating it. Here is a screenshot of a portion of my spreadsheet showing a few relevant data points.

VTS spreadsheet showing necessary data

The three data points that I need for my calculation are:

  • M1-M7 VIX futures
  • Trading days to expiration
  • Future roll / day

All I do is take those simple input variables and adjust the M1 and M2 depending on how many days to expiration and what percentage of each future is being used on average for the front month volatility ETP calculation.

Adjusted M1 VIX future: M2 - ( (M2 - M1) * (days * future roll) )

Adjusted M2 VIX future: M3 - ( (M3 - M2) * (days * future roll) )

Adjusted M1:M2 contango = (adjusted M2 - adjusted M1) / adjusted M1

Now I have a realistic contango reading that takes into account the number of days to expiration and there is no jump in values around expiration. It's just a smooth reading of VIX futures contango that I can then use any time I need that value

Now it's very important to remember that VIX futures are actually just a small cog in the wheel of the volatility complex. I don't want to give the impression today that this is the holy grail of trade signals. It's just one of over a dozen that I use every day. Having said that, I do think it's something every aspiring volatility trader needs to understand, and the "adjusted" method is superior in my opinion. Like I said there are other ways to adjust the futures, feel free to get creative with it, but the goal is just to smooth out the readings so it's not jumpy around expiration.

Is this information actionable for VXX and the like?

Sometimes I get people ask me if there's any advantage to buying or selling the volatility ETPs a day or two before expiration and then flipping it a day or two after, trying to capture this expected drop in contango.

* Very important: These jumps in M1:M2 VIX futures contango around expiration have no effect on the actual price of the volatility ETPs. They already use constant rolling contracts in their methodology and are already adjusted for this expiration voodoo.

Adjusted M1:M2 VIX futures contango since Mar 26, 2004

M1:M2 VIX futures contango since inception

You can see in that chart out to the far right that current M1:M2 VIX futures contango isn't as high as it gets right now as the traditional method would have us believe. It's actually just middle of the road, fairly close to its long term average. This adjustment method just makes for a more accurate reading because it removes the uncertainty that expiration cycles create.

You can see below it does change a few of the longer term statistics as well compared to the traditional method most other people use:

M1:M2 contango vs adjusted contango statistics

Homework assignment:

VIX futures expire the third Wednesday of every month. If you want to see why this adjustment method is so important, get into the habit of checking VIX futures both on the Tuesday before expiration, and then the next day on expiration Wednesday. You'll see it for yourself. The M1:M2 contango values will typically be much higher on Tuesday than Wednesday, even on those days when nothing materially changed in the markets.

From our example, on Tuesday Apr 16, 2019 the VIX futures were 16.30% in contango. The absolute contango level rarely gets that high which would give us the impression volatility was extremely low on that date. However the next day on Wednesday Apr 17, 2019 that value dropped to just 6.84% contango. Nothing changed in the markets, volatility was stable, but the passage of one day and the front month VIX future expiring changed that level substantially.

Trading the various volatility ETPs available carry with it certain additional risks, so I feel it's very important that at the very least traders have the correct information to make the most informed decisions. Using the more accurate adjusted M1:M2 VIX futures contango may yield better long term trading results.

Disclosure: I am/we are short VXX. I wrote this article myself, and it expresses my own opinions. I am not receiving compensation for it. I have no business relationship with any company whose stock is mentioned in this article.

Additional disclosure: On the date of writing I was short volatility through long SVXY, long ZIV, and long VXX Put options.