Please Note: Blog posts are not selected, edited or screened by Seeking Alpha editors.

MAX Drills 4.6 M @ 58.0 G/t Ag And 7.6 M @ 0.80% Copper Within An Overall Mineralized Intercept Of 332 M @ 12.0 G/t Ag And 0.13% Cu (23.9 G/t AgEq) In Oxides At Majuba Hill, Nevada



Gold: The Best Charts and Fundamentals - Prepare For The Fireworks In Junior Miners

"We would like to share with you today the best Charts and articles, which has caught our attention recently - it is the case when the good picture is better than thousand words - some of them are screaming about the best Entry Opportunity in years we are following these markets."


MAX Resource Corp. - "Focused on Silver, Copper & Gold in Nevada" MXR.v

"Max Resources is another junior which is trying to pick up its head out of summer doldrums. Some bids are coming in last couple of weeks."

Max Resources has its own fireworks with the new drill results released yesterday.

MAX drills 4.6 m @ 58.0 g/t Ag and 7.6 m @ 0.80% copper within an overall mineralized intercept of 332 m @ 12.0 g/t Ag and 0.13% Cu (23.9 g/t AgEq) in oxides at Majuba Hill, Nevada; new historic data confirms extension of high-grade mineralized system 500 m to the southeast of Majuba Hill mine and to a depth of 350 m from surface.

MAX Resource Corp. (TSX.V: MXR; OTCBB: MXROF; Frankfurt: M1D) has received assays from the first hole of an eight hole (872 m) Phase III core drilling program completed at its Majuba Hill silver/copper/gold project in Nevada in June 2012. This first hole, MM-21, was drilled to a depth of 351 metres ("m") and confirms the southeast extension of near-surface high-grade supergene oxide mineralization identified by Max at the historic Majuba Hill mine during 2011. Hole MM-21 intercepted 4.6 m @ 58.0 g/t Ag and 7.6 m @ 0.80% Cu within an overall mineralized intercept of 332 m @ 12 g/t Ag and 0.13% Cu (23.9 g/t silver equivalent ("AgEq")) in oxides that began within 12 m of surface.

Hole MM-21 was collared approximately 250 m southeast of the middle portal of the past-producing Majuba Hill mine, where Phase I drilling by MAX in 2011 intercepted long intervals of high grade silver and copper mineralization near surface in five holes, which included:


  • 96 m of 39.2 g/t Ag, 0.57% Cu and 0.10 g/t Au (98.3 g/t AgEq) in hole MM-06
  • 50.3 m of 50.8 g/t Ag, 0.31% Cu and 0.31 g/t Au (86.7 g/t AgEq) in MM-07
  • 42.7 m of 37.5 g/t Ag and 0.38% Cu (73.0 g/t AgEq) in hole MM-03

Hole MM-21 confirms that a southeast trending ridge of high-grade oxide mineralization extends a further 500 m to the southeast from the Majuba Hill mine to the Ball Park target area, where drilling in 2011 (hole MM-17) intercepted 42.7 m of 16.8 g/t Ag, 13.7 m of 15.9 g/t Ag and 6.16 m of 51.0 g/t Ag. A map showing drilling locations from the 2011 exploration programs at Majuba Hill, as well as the location of MM-21, is available on our web site

Significant intervals from hole MM-21 are summarized in the following table:

Hole Azimuth Angle Total Depth From (m) To
Thickness (m) Cu
MM-21 068 -44 351.4 m 12.2 344.5 332.3 m 0.13% 12.0 23.9
includes       50.3 131.1 80.8   19.2  
includes       56.4 61.0 4.6   58.0  
includes       259.1 266.7 7.6 0.80% 10.8  
includes       263.7 266.7 3.0 1.16% 10.1  
includes       242.4 291.1 48.7 0.32% 16.5 47.1
Note: Silver equivalent is calculated based on 100% metallurgical recovery and five-year historic metal prices of $24 U.S. for silver and $3 U.S. per pound for Copper.

MAX has just recently obtained some of the data from drilling completed by the Minefinders Exploration group at Majuba Hill in 1974-5. This information was obtained from a reliable source but readers are cautioned that this information predates NI 43-101 and is not NI 43-101 compliant; it is provided for information purposes only and should not be relied upon. This data included Minefinders hole MF-01, which was drilled a further 250 meters to the southeast of hole MM-21 at an azimuth of 288 and a -54 angle to a total depth of 707 meters. Hole MF-01 was assayed on 3 meter intervals and contained 155.4 m @ 9.23 g/t Ag and 0.221% Cu starting at a down hole depth of 220 meters. Minefinders hole MF 2 was drilled at the same location as MAX's hole MM-17 to a depth of 387 m and intercepted 30.5 m @ 0.60% Cu from 85.3 m to 115.8m. It also contained 91.4 m @ 11.2 g/t Ag from 42.7 m to 134.1 m, inclusive of 9.1 m @ 53.0 g/t. These drill results, combined with the results from our hole MM-21, serve to expand the known mineralized silver/copper zone for 500 m to the southeast and to a depth of at least 350 m from surface.

Assay results are expected shortly for the remaining seven holes of the program, which were shallow and were drilled to test near-surface mineralization at the DeSoto soil anomaly 1.4 km to the northwest, where hole MM-18 intercepted 29.2 m of 30.5 g/t Ag and 0.69% Cu (98.3 g/t AgEq) in the fall of 2011. The high grade DeSoto soil anomaly was defined by soil sampling and measures approximately 2 km long by 1 km wide, with values as high as 1.53% Cu and 209 g/t Ag in soils.

Majuba Hill is the site of numerous past producing mines, with historic production reported of 12% copper (Mason Valley Copper, 1918) and silver grades up to 40 oz/t Ag. The Majuba Hill project encompasses 3,128 acres of surface and mineral rights that includes patented lode mining claims. The property is easily accessed via 23 miles of well-maintained dirt roads leading from U.S. Interstate 80, and lies 30 miles northwest of Coeur d'Alene's Rochester silver mine, which contains a NI 43-101 compliant Measured and Indicated Resource of 263.9 million tons grading 0.46 oz/ton Ag and 0.004 oz/ton Au. (The Coeur Technical Report on the Rochester Mine is available on SEDAR). For more detailed information on the Majuba Hill project, please visit our web site at

This news release has been reviewed by Mr. Clancy J. Wendt, P. Geo, a "qualified person" as that term is defined under National Instrument 43-101. The historic information provided has not been verified by MAX and is for reference only.

About MAX Resource Corp.

MAX Resource Corp. is a Canadian exploration company focused on gold and silver exploration in Nevada. For more information, please visit our web site at

On behalf of the Board of Directors of
MAX Resource Corp.


Stuart Rogers


Contact: Leonard MacMillan, Corporate Communication
Telephone: (866) 331-5088 or (604) 637-2140

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Please, do not forget, that we own stocks we are writing about and have position in these companies. We are not providing any investment advise on this blog and there is no solicitation to buy or sell any particular company